|
|
|
|
30-July-2018 |
-
It is a Er/Yb Doped Fiber Amplifier that utilizes multimode laser pumping, all-fiber combiner and Erbium/Ytterbium double-clad,large-core fiber technologies to provide high RF output power over wide frequency bands.
|
|
Browse Website
|
|
Features
Serve as Rack mountable amplifier
High and stable saturated output power 17dBm per port
8 ports available, if you need other ports, please contact at sales@fiber-mart.com
High Power: Up to 2W total, 1 Unit for 2000~4000 optical node
Alternative RF Connectors: Duplex SC/UPC, SC/APC, FC/UPC, FC/APC, LC/UPC, LC/APC , ST/UPC and ST/APC available for choice
Single or dual 110VAC, 220VAC, and/or -48VDC power supply
1550nm Typical operating wavelength, Integrated 1310nm/1490nm/1550nm WDM for Optional
ATC (Automatic Temperature Control) and APC (Automatic Power Control) circuit
High stability and high precision MPU system
Intelligent network management system
SNMP network management ensure the connectivity with all other network management system
Network interface comes with Ethernet, RS-485 and RS-232
10 years of operation life
3 years warranty
Application
CATV analog/digital signal distribution
FTTH Optical Access
Optical Distribution System
In laboratory or field applications
R&D and Training
Order Information
Category APP Mechanical Configure Input Power Power/CH Ports Power1 Power2 Connector WDM
HA 1 2 2 0 17 32 2 2 2 0
HA: High Power Amplifier 1:CATV 1:1U 1:Normal 0:-3~+10dBm 17:17dBm 1:1 port 1:110VAC 1:110VAC 1:SC/UPC 1:w/WDM
2:2U 2:High End 1:+5~+15dBm 18:18dBm 16:16 ports 2:220VAC 2:220VAC 2:SC/APC 0:w/o WDM
2:0~+10dBm …… 24:24 ports 3:110~220VAC 3:110~220VAC 3:FC/UPC
3:-8~+10dBm 33:33dBm 32:32ports 4:-48VDC 4:-48VDC 4:FC/APC
4:Others 0: None 5:LC/UPC
6:LC/APC
Note 1: 1U rack, Maxim ports number: 4(SC/APC), or 8(LC/APC); 2U rack, Maxim ports number: 16(w/WDM), or 32(w/o WDM)
Note 2: High End configure with SNMP Net management, with standby switch function by RS485 connect.
Parameters Symbol Min Typ Max Unit
Operation Wavelength λc 1540 1550 1565 nm
Saturated output power (1) Po 13 33 dBm
Input power Pi -3 10 dBm
Gain G 30 dB
Noise Figure (2) NF 6 dB
Output Power Stability ΔPo ±0.05 ±0.2 dB
Input Isolator ISOi 30 dB
Output Isolator ISOo 30 dB
Input Pump Leakage PumpLin -35 dBm
Output Pump Leakage PumpLout -45 dBm
Return Loss RL -45 dB
Polarization Dependent Gain PDG 0.3 dB
Polarization Mode Dispersion PMD 0.5 ps
Operating Temperature Tw -5 60 ℃
Storage Temperature Ts -40 80 ℃
Humidity (3) 10 85 %
Power Supply Vps 170 264 VAC
Power Consumption P 50 W
(1): Customer optional
(2): Test at +5dBm input
(3): No condensation
|
|