HOME 
Data Communications Ethernet|
|
|||||
|
|||||
| 24-July-2018 | |||||
|
|||||
Browse Website_40GBASE_QSFP__to_LC-SC-ST-FC_Connector(8/Img_1532331721352/3M(98ft)_40GBASE_QSFP__to_LC-SC-ST-FC_Connector(8_01.jpg)
|
0GBASE QSFP+ to eight LC/SC/ST/FC Connector Breakout Active Optical Cable are a high performance, low power consumption, long reach interconnect solution supporting 40G Ethernet, fiber channel and PCIe. It is compliant with the QSFP MSA and IEEE P802.3ba 40GBASE-SR4. QSFP+ Breakout Cable is an assembly of 4 full-duplex lanes, where each lane is capable of transmitting data at rates up to 10Gb/s, providing an aggregated rate of 40Gb/s. QSFP+ Breakout Cable are suitable for short distances and offer a highly cost-effective way to connect within racks and across adjacent racks. This product is a high data rate parallel active optical cable (AOC), to overcome the bandwidth limitation of traditional copper cable.
All our 40GBASE QSFP+ to LC/SC/ST/FC Connector(8) Breakout Active Optical Cable are 100% compatible with major brands like Cisco, Juniper, Enterasys, Extreme, H3C and so on. If you would like to order high quality compatible 40GBASE QSFP+ to LC Connector(8) Breakout Active Optical Cable and get worldwide delivery, we believe Fiber-mart.COM is your best choice. Specifications Connector 1: QSFP+ Connector 2: 8 x LC/SC/ST/FC Connector Length: 3 meters Cable Type: AOC Cable Full duplex 4 channel 850nm parallel active optical cable Transmission data rate up to 10.3Gbit/s per channel SFF-8436 QSFP+ compliant housing and hot pluggable electrical interface. Management Interface and digital diagnostic monitoring(DDM) through I2C Support Rx output pre-emphasis 4ch 850nm VCSEL array 4ch PIN photo detector array Helix type multi-mode optical fibre cable of up to 100m OFNP (Optical Fibre Non-Conductive Plenum) rated cable Differential AC-coupled high speed data interface Housing isolated from connector ground Operating Temperature: 0 to 70℃ RoHS 6 compliant 3.3V power supply voltage Applications Infiniband transmission at 4ch SDR(2.5Gbit/s), DDR(5Gbit/s) and QDR(10Gbit/s) Multi-channel 10Gb Ethernet transmission up to 4 channels Fiber Channel transmission at 8.5Gbit/s per channel, up to 4 channels QSFP+ to LC/SC/ST/FC cables with MT connectors for plugging into existing cable runs or patch pannels Creating a breakout cable with four Duplex LC connectors for port expander applications SDR /DDR /QDR Data Centers Ordering Information Part No. Data Rate Length Cable Type Connector Type Temp. Range QSFP-8X-AOC-1 Up to 40G 1m AOC Cable QSFP+ to 8 x LC/SC/ST/FC 0-70℃ QSFP-8X-AOC-2 Up to 40G 2m AOC Cable QSFP+ to 8 x LC/SC/ST/FC 0-70℃ QSFP-8X-AOC-3 Up to 40G 3m AOC Cable QSFP+ to 8 x LC/SC/ST/FC 0-70℃ QSFP-8X-AOC-4 Up to 40G 4m AOC Cable QSFP+ to 8 x LC/SC/ST/FC 0-70℃ QSFP-8X-AOC-5 Up to 40G 5m AOC Cable QSFP+ to 8 x LC/SC/ST/FC 0-70℃ QSFP-8X-AOC-6 Up to 40G 6m AOC Cable QSFP+ to 8 x LC/SC/ST/FC 0-70℃ QSFP-8X-AOC-7 Up to 40G 7m AOC Cable QSFP+ to 8 x LC/SC/ST/FC 0-70℃ QSFP-8X-AOC-8 Up to 40G 8m AOC Cable QSFP+ to 8 x LC/SC/ST/FC 0-70℃ QSFP-8X-AOC-9 Up to 40G 9m AOC Cable QSFP+ to 8 x LC/SC/ST/FC 0-70℃ QSFP-8X-AOC-10 Up to 40G 10m AOC Cable QSFP+ to 8 x LC/SC/ST/FC 0-70℃ Notes Custom 40GBASE QSFP+ to LC/SC/ST/FC Connector(8) Breakout Active Optical Cable are available in various lengths and other options. xx means compatible brand. (For example: CO= Cisco, JU=Juniper, FD=Foundry, EX=Extreme, NE=Netgear,etc. The two characters are short for compatible brand.) X means LC,SC,ST or FC Connector. |
| Add URL | | | My Sites | | | My Account | | | Login | | | Contact Us |