KL-280G
Fusion splicer KL-280 features a rubberized design for field use in harsh weather conditions.The fusion splicer has a friendly, intuitive GUI (Graphical user Interface) with a 5.7 inch color LCD screen that is easy to see and is adjustable for front and rear splicer orientation. The fusion splicer can 9 seconds splice time and 30 seconds heat time. The sizeable, large battery capacity at full charge allows for up to 400 splices.
If you can’t find what you are looking for, please contact us.
Key Features
Core to core alignment by PAS technology (PAS: Profile Alignment System)
Fiber core can be display clearly
Single X or Y view and X & Y view simultaneously
Auto check quality of cleaved end face
5.7 inch TFT color LCD monitor with clear digital image display USB & VGA interface
Software upgrade via USB interface
Specification
Applicable fibers SM MM DS NZDS
Fiber diameter Cladding diameter: 80- 150μm;Coating diameter: 100-1000μm
Fiber count Single
Fiber cleaved length 12-16mm (Coating diameter:250μm)
Actual average splice loss 0.02dB(SM) ,0.01dB(MM) ,0.04dB (DS) ,0.04dB (NZDS)
Typical splicing time Typical 9 sec (standard SM fiber)
Return loss >60dB
Splicing mode Auto Calibrate Normal Special
Fiber aligning method Meticulous,Core,Clad,Manual
Splicing program 53 (templet), 40(user)
Tube heating program 9 (templet),24(user)
Tube typical heating time Typical 30 sec
Protection sleeve length 60mm , 40mm
Storage of splice result 4000 results , 20 parameter per result
Fiber image magnification 300X (X or Y view),150X (X and Y view)
Battery capacity Typical 400 cycles (splice/tube heaty)
Monitor 5.7 inch TFT color LCD monitor
Tension test 2N
Electrode life 2500
Terminal USB
Power supply AC 100-240V with AC adapter
Inner Li-battery (5200mAh)
Operating condition 0-5000m above sea level , -10- 50°
Max wind velocity of 15m/s
Dimension 150mm(L)×150mm(W) ×150mm(H)
Weight 2.55Kg including battery
Function Comparision of Jilong Fusion Splicer
Function KL-280G KL-280 KL-300T KL-500
Display fiber cleaved angle - - ● ●
Display fiber offset angle - - ● ●
Display core offset - - ● ●
Display clad offset - - ● ●
Splicing mode (Auto, Calibrate ,Normal ,Special) ● - ● ●
Fiber aligning method (Core 、 Clad 、 Manual) ● - ● ●
Arc strength automatic adjustment ● - ● ●
Image turn over - ● ● ●
Fiber angle limit - - ● ●
Display inside temperature - - ● ●
Display ambient temperature - - ● ●
Display heater temperature - - ● ●
Display air pressure - - ● ●
Display battery voltage - - ● ●
Taper splice - - ● ●
Sleep - - ● ●
Auto shut down - - ● ●
Software upgrade via USB interface ● - ● ●
( ● means YES , - means NO )
|