HOME 
Home Automation Vendors|
|
|||||
|
|||||
| 15-August-2018 | |||||
|
|||||
Browse Website
|
12 Fibers, MTP to LC/SC/ST/FC, 9/125um Singlemode Fiber, 12 Standard - MTP Breakout Harness Cable
MTP is the high dense degree of optical fiber pre-connect system,which is generally use in three areas: The data centra application with high dense degree environment The optical fiber to the building The internal connector application in fiber equipment such as Splitter, 40G /100G SFP and SFP+. Fiber-Mart's MTP fiber patch cable is compliant to IEC-61754-7 and TIA-604-5(FOCIS-5) standard. It can be widely used forFiber-MART.Com pdf_d.png10G upgrade to 40G/100G data center. MTP Connector MTP Male with Pins MTP Female without Pins Two other clearly visible features are the noses and guide grooves (keys) on the top side. The Female and Male need to be used together. Pre-terminated MTP Technology-Polarity Type B (Cross) The application above is for the MTP-LC harness cable connecting a QSFP+ port to (4)SFP+ ports directly. In many existing DC environments, LC-MTP cables are used to support high density fiber trunks between switches, rack patch panels and main distribution cabling panels (MDA). For example: The above is the Eight-Fiber MTP-LC Assembly uses a pinless connector on one end for interfacing with the QSFP port on the Cisco Nexus 6000series, The other end contains four LC uniboot connectors, which provide connectivity to the SFP+ ports on the switch. The polarity of the assembly pairs the fibers from the MTP Connector from the outside to the inside; thus, fiber 1 and fiber 12 are a duplex pair, as are fiber 2 and fiber 11, etc. MTP&MPO Difference The term MTP is a registered trademark of US Conec, which have became the tendency in Europe&American fiber communications areas at present. Assembly Structure Illustration 12-Fiber Mini-Core Cable structure MTP Hybrid Harnesses Fiber Patch Cables are terminated with MTP connector on one end and other end with LC, FC, SC, ST, or MTRJ connectors to meet a variety of fiber cabling requirements. 1.The default diameter of the MTP cable is 3.0mm. 2.The diameter of branch cable could be choose as 0.9mm,2.0mm,please kindly contact us at sales@fiber-mart.com for other diameter standard. 3.Fiber-Mart can also custom the pulling eyes, welcome to contact us if you need. MTP/MPO Machinery & Testing Equipment Fiber-MART.Com fs-Machinery-Testing-Equipment-01.jpg 1 Our adopt industry's leading high-performance polishing machine, and complemented by precision plates holders designed for MT ferrules. 2 The industry leading device of 3D interferometer provides verification of MTP/MPO polishing process, the interferometer making all parameters of hte polished MT ferrule complies and exceeds industry standards. 3 After the 3D interference detection, the flexibility of the tester provides the the complete spectrum of optical testing required for complex and high fiber count cable assemblies. Fiber-MART.Com fs-Machinery-Testing-Equipment-02.jpg MTP Termination Type Single mode Single mode Multi mode (APC polish) (PC polish) (PC polish) Fiber count 8, 12, 24 etc. 8, 12, 24 etc. 8, 12, 24 etc. Fiber type G652D, G657A1 etc. G652D, G657A1 etc. OM1, OM2, OM3 etc. Maximum Insertion Loss Elite Standard Elite Standard Elite Standard Low Loss Low Loss Low Loss ≤0.35 dB ≤0.70 dB ≤0.35 dB ≤0.70 dB ≤0.35dB ≤0.60dB Return Loss ≥60 dB ≥60 dB N/A Durability ≥500 times ≥500 times ≥500 times Operating Temperature -40℃ ~ +80℃ -40℃~ +80℃ -40℃~ +80℃ Test Wavelength 1310nm 1310nm 850nm Common Termination Type Single mode Multi mode (UPC APC polish) (UPC polish) Insertion Loss ≤0.30dB ≤0.30dB Return Loss ≥55 dB ≥60 dB ≥25 dB Durability ≥1000 times ≥1000 times Operating Temperature -40℃ ~ +80℃ -40℃ ~ +80℃ Test Wavelength 1310nm 850nm Note: Maximum Bandwidths of Different Multimode Fibers OM1 – 62.5 um Core – 10GBit up to 33 meters, gigabit up to 300m OM2 – 50 um Core – 10GBit up to 82 meters,gigabit up to 500m OM3 – 50 um Core, Laser Optimized – 10GBit up to 300 meters,gigabit up to 1000m OM4 – 50 um Core, Laser Optimized – 10GBit up to 550 meters,gigabit up to 1000m Make To Order Fiber Type Fiber Standard Fiber Count Cable Type Termination Cable Length(m) Breakout Length 1&2(Inches) Breakout Termination Polish Type OM4 OM3 OS1/2 OM2 OM1 12 Fibers 8~144 Fibers LSZH Bunch LSZH Ribbon Riser Bunch Riser Ribbon First Connector: MTP Female MTP Male 1~999 12~99 (36" is typical) 3.0mm UPC APC 24 Fibers 24~144 Fibers Second Connector: LC Duplex/LC Simplex SC Duplex/SC Simplex ST Duplex/ST Simplex FC Duplex/FC Simplex 0.9μm (standard) 2.0mm 3.0mm Note:Polishing connector (A): PC (multimode), APC 8° (single-mode) Polishing connector (B) : PC (multimode/single-mode), APC 8° (single-mode) Furcation length (B): 0.5m/0.3m for 1m total length Type of protection connector: IP20 Patch cord Type: Minicore cable, round If any option which is not indicate in your Ordering, please write your option or request in your ORDER to Fiber-Mart, and contact with us. You can place your Order Online in our website, you can send us a Purchase Order as a company, or you can request a Proforma Invoice Order to make everything clear! Get All the Support about Purchase Professional Service & Support is available in three different ways Chat live with Fiber-Mart Offline Please leave us a message, we'll respond to you as soon. 8 am. to Midnight PST Mon. to Fri. or Leave Message Email to Fiber-Mart E-mail Now Post a inquiry request and get a quick response from Fiber-Mart. Make a Call +86-1-86-2786-1199 Or click on the button below to have us call you. 8 am.- 5 pm. PST. Mon. to Fri. Get a Call |
| Add URL | | | My Sites | | | My Account | | | Login | | | Contact Us |